Communicate with Supplier? Supplier
guo Ms. guo
What can I do for you?
Contact Supplier

Pcb With Osp Surface Finished - manufacturer, factory, supplier from China

(Total 24 Products for Pcb With Osp Surface Finished)

  • Organic solderability preservative circuit board

    Organic solderability preservative circuit board

    • Model No.: TP2W60103A

    Double side Organic Solderability Preservative printed circuit board Organic solderability preservative is a cheap surface treatment This surface treatment can protect the PCB board surface and facilitate PCB assembly Its advantage is that it is easy to weld this kind of PCB boards need to complete PCB assembly within...

    Contact Now

  • ENIG finished circuit board

    ENIG finished circuit board

    • Model No.: TPAW600451A

    10 Layer Binding gold multilayer circuit board Base material FR4 KB6167 tg170 Surface treatment immersion gold 5U Binding location design requirements Green colour soldermask circuit board The advantages of multilayer circuit boards high assembly density small size and light weight Due to the high assembly density the...

    Contact Now

  • Printed circuit board surface treatment

    Printed circuit board surface treatment

    • Model No.: TP6W66047A

    6 Layer Hot Air Solder Level with lead pcb board Base mertiral FR4 IT158 TG150 Inner layer 0 5oz and outer layer copper thickness 1oz finished Min track space 0 1 0 1mm Green soldermask and white silkscreen Lead hot air solder level is made by modulating tin and lead in a certain proportion Lead will increase the...

    Contact Now

  • Double side HASL pcb board

    Double side HASL pcb board

    • Model No.: TP2W101258A

    Double side hot air solder level pcb board Green slodermask and white silkscreen Outer copper finished 2 5oz board thickness 0 8 0 1mm The advantages of the HASL surface treatment is 1 The component has a good degree of moisture during soldering and soldering is easier 2 The exposed copper surface can be protected...

    Contact Now

  • Immersion gold pcb board

    Immersion gold pcb board

    • Model No.: TPAW60165A

    Multilayer FR4 High TG with Immersion gold circuit board Surface treatment according to IPC 4552 EING AU 2 4U NI 118 236u Inner layer 2oz and outer layer 2 5oz Min hole copper thickness according to IPC III min 25um FR4 S 1000 2 TG170 board thickness 2 5mm Dark green soldermask and white silkscreen Through chemical...

    Contact Now

  • FR4 high-tg pcb board

    FR4 high-tg pcb board

    • Model No.: TP2W11A245A

    Double side immersion gold circuit board without soldermask Copper thickness 3oz finished immersion gold 4U Base material FR4 S1000 2 board thickness 2 0mm The purpose of the Immersion Gold process is to deposit a nickel gold coating with stable color good brightness smooth plating and good solderability on the...

    Contact Now

  • Medium size and small volume PCB

    Medium size and small volume PCB

    This is Medium size and small volume PCB order We are required to produce 3000 pcs Total order area up to 91 66 square metres Total cargo weight approximately 350kg We completed production within 25 working days and delivered it smoothly to our German terminal customers The basic information for this batch order is as...

    Contact Now

  • Impedance control pcb board

    Impedance control pcb board

    • Model No.: TP6W19068A

    6 layer Multilayer impedance circuit board Surface treatment ENIG 2U Green slodermask and white silkscreen Inner copper 1oz and outer copper finished 1oz board thickness 1 6mm 10 there are ten sets of impedance design in this board 50 ohms single end impedance and 90 ohms 100 ohms differential impedance Impedance...

    Contact Now

  • Component mounting for PCB

    Component mounting for PCB

    • Model No.: T2S019042A0

    Component Mounting And Soldering The final step is to mount and solder the components Both THT and SMT components are placed on the PCB by machines or by hand THT components are most often soldered in an automated process called Wave Soldering This enables all components to be soldered simultaneously Their legs are...

    Contact Now

  • Component Mounting &Soldering for pcb

    Component Mounting &Soldering for pcb

    • Model No.: TP8WA075A0

    Integrated circuit Component Mounting And Soldering First according to the requirements of the drawings check whether the model and pin position meet the requirements Welding the first edge welding two pins so positioned then left to right top to bottom welding For capacitors diodes and triodes exposed on the printed...

    Contact Now

  • One-stop service for pcb

    One-stop service for pcb

    • Model No.: TPIA61512A

    We are committed to becoming the world s leading hardware outsourcing provider After years of learning and accumulation we are now able to provide customers with One stop solution from design to PCB production and PCB assembly There are now eight pcb design engineers and hundreds of workers on the production line For...

    Contact Now

  • Thin rigid pcb board

    Thin rigid pcb board

    • Model No.: TP2W180145A

    Double side Thin board thickness pcb board Base Material FR4 Shengyi S1141 TG140 copper thickneess 1oz finished surface treatment Immersion Gold 2U With green soldermask Thin board thickness Finished board thickness only 0 2mm so it can be bend Min line width Min line spacing 0 18 0 18mm E test 100 The double side...

    Contact Now

  • surface-mount technology for PCB

    surface-mount technology for PCB

    • Model No.: TP4A014AO

    Surface mount technology one of the PCB assembly technology short name is SMT In general small resistors capacitors BGA etc are assembled in the form of SMT In surface mount technology SMT the component is placed on the PCB so that the pins line up with the conductive pads or lands on the surfaces of the PCB solder...

    Contact Now

  • Flash gold pcb board

    Flash gold pcb board

    • Model No.: TP4W35279A

    4 layer Multilayer rigid ENEPIG circuit board Surface treatment ENEPIG AU 0 03 0 1um Pd 0 1 0 2um NI 3 6um Green slodermask and white silkscreen Inner copper 1 oz and outer copper finished 1 0 oz board thickness 1 6mm 10 Design with 50 ohms single end impedance tolerance 10 Our General Capabilities Can be 1 40 Layers...

    Contact Now

  • Thick copper pcb board

    Thick copper pcb board

    • Model No.: TP4W60321A

    4 layer heavy copper circuit board Base Material FR4 TG170 shengyi S1000 2 material copper thickneess inner layer 3oz and outer layer 3oz finished surface treatment immersion gold 2 4u Green soldermask Finish board thickness 2 4mm Min hole copper thickness 25um 2 UP with routed v cut E test 100 We can do the surface...

    Contact Now

  • Thin board thickness pcb

    Thin board thickness pcb

    • Model No.: TP2W11A235A

    Double side Thin board thickness pcb board Base Material FR4 TG135 copper thickneess 1oz finished Immersion Gold surface treatment with matt black soldermask Thin board thickness Finished board thickness only 0 2mm so it can be bend Min line width Min line spacing 0 15 0 15mm E test 100 The double side board is one of...

    Contact Now

  • Immersion Tin pcb board

    Immersion Tin pcb board

    • Model No.: TP4W570031A

    4 Layer immersion Tin pcb board the base Material is FR4 KB6160 TG135 4 layer PCB Copper thickness is inner layer 2oz and outer layer 2oz finished Board Thickness is 1 2mm and the Min Hole Size is 0 2mm Min Line Width Min Line Spacing is 0 2mm 0 2mm green solder resist with large white silkscreen E test 100 Immersion...

    Contact Now

  • Immersion Tin surface treatment

    Immersion Tin surface treatment

    • Model No.: TP6W60123A

    6 layer immersion Tin pcb board the base Material is FR4 KB6167 TG170 Copper thickness both inner and outer 1oz finished Board Thickness is 1 6mm and the Min Hole Size is 0 2mm Min Line Width Min Line Spacing is 0 13mm 0 13mm green solder resist with white silkscreen E test 100 Immersion Tin is a common surface...

    Contact Now

  • OSP surface treatment board

    OSP surface treatment board

    • Model No.: TP4W62011A

    4 layer osp board Base material FR4 TG135 Finished board thickness 1 0mm Unit size 93 90mm green soldermask and white silkscreen Need to ensure keep the solder bridge Organic solderability preservative is a cheap surface treatment This surface treatment can protect the PCB board surface and facilitate PCB assembly...

    Contact Now

  • Surface mount technology of circuit board

    Surface mount technology of circuit board

    • Model No.: TP2W61001A

    Surface mount technology of circuit board we provide customer both pcb and pcba this pcb is very small unit size only 10 6 12mm Base material FR4 S1141 TG135 Board thickness 1 2mm White soldermask and black silkscreen surface treatment 2U We are required to make two sets of PCBA for different components The final step...

    Contact Now

  • Hot Air Solder Level PCB

    Hot Air Solder Level PCB

    • Model No.: TP4W201045A

    Multilayer HASL LF circuit board Base Material KB6160 FR4 TG130 Copper thickneess 1oz inner layer and 1oz outer finished surface treatment HASL 1 38um lead free Green soldermask and white silkscreen Finish board thickness 1 2mm min hole copper thickness 25um 2 UP with routed v score AOI 100 E test 100 We can do the...

    Contact Now

  • Multilayer rigid pcb board

    Multilayer rigid pcb board

    • Model No.: TPGW611285A

    20 layer Multilayer rigid circuit board surface treatment ENIG 3U Inner layer 1oz and outer layer 2oz FR4 IT180A TG180 board thickness 3 6mm green soldermask and white silkscreen Our General Capabilities Can be 1 40 Layers rigid board and 1 12 layers flexible circuit board Surface treatment surface finished can be...

    Contact Now

  • Yellow colour pcb board

    Yellow colour pcb board

    • Model No.: TP4W14047A

    4 layer yellow colour pcb board Surface treatment ENIG 2U Yellow slodermask and red silkscreen Inner copper 3oz and outer copper finished 3oz board thickness 2 4mm 8 Our General Capabilities Can be 1 40 Layers rigid board and 1 12 layers flexible circuit board Copper thickness can be 1 10 oz Outer and 0 5 8 oz inner...

    Contact Now

  • With countersunk hole circuit board

    With countersunk hole circuit board

    • Model No.: TPAW610456A

    10 Layer black colour multilayer FR4 S1000 2 tg170 circuit board surface treatment immersion gold 2 4U and NI 118 236U Our General Capabilities Can be 1 40 Layers rigid board with the base material like FR 4 tg135 tg150 tg170 tg180 Rogers RO4350 RO4003 ISOLA Taconic Arlon NELCO Megtron6 aluminium base Copper base and...

    Contact Now

Review

Joe Wood

Oct 17, 2019 4

Thank you for rapid shipping. It’s Good !
Jonathan Sanglay

Oct 16, 2019 5

Great Pcb With Osp Surface Finished . Would buy again.
Miguel Chen

Oct 16, 2019 5

great shipment! awesome product!glad to working with Orilind Limited Company company!
It adheres for the tenet "Honest, industrious, enterprising, innovative" to develop new products and solutions continuously. It regards shoppers, success as its individual success. Let us produce prosperous future hand in hand for Pcb With Osp Surface Finished , PCB with OSP Surface Finished , The Circuit Surface Finished , We are also frequently hunting to determine relationship with new suppliers to deliver impressive and good option to our valued buyers.
"It is our responsibility to meet your needs and efficiently serve you. Your satisfaction is our best reward. We are looking forward to your visit for joint growth for Pcb With Osp Surface Finished , PCB with OSP Surface Finished , The Circuit Surface Finished , We have advanced production technology and pursuit innovative in products. At the same time the good service has enhanced the good reputation. We believe that as long as you understand our product you must be willing to become partners with us. Looking forward to your inquiry.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Home

Phone

Skype

Inquiry